Tuesday, August 8, 2017

Fondant Bead Chain (3D) and the Alice in Wonderland Cake

Hello Cake Couture Fans!

This is one of my VERY few pictures of me and one of my cakes!  Definitely need more of these:).

Today I wanted to share with you my 3D beading technique.

This might seem the same as the technique used on the borders of the top and bottom tiers, but nope, this is TOTALLY different! Note: the beaded borders are shaped using a 2D mold.

I was struggling to figure out just how to make this pocket watch look more chain-like.  I finally decided if I wanted it out of fondant it would be best to have a 3D beaded chain.

I also used this technique to make tear drops in a past project (see image below)

This technique is 'flossin', check it out!:)


White Dental Floss
Threading sewing needle
Floral wire
Sugar glue (1/2 tsp. tylose, 1/2 tsp sugar, 3-4 tbsp of super hot water, stir and set aside for about an hour)

Step 1
Thread your needle with a long piece of dental floss.  Tie opposite end with a large knot and preferably with a small piece of floral wire.

Step 2
Roll your fondant into the shape you want

Step 3
Connect your pieces using your needle and floss. Note: If you want to create a separated look as in the raindrops, apply sugar glue to the areas of the floss that the fondant will sit on; after setting your fondant pieces the preferred distance apart let them set to dry.

Step 4
Secure your loose floss ends by sandwiching them between fondant layers (as in the cloud in the raindrop cake) or using floral wire to insert it into the cake.  

Step 5
Secure any loose beading if possible with sugar glue and paint accordingly.

Let me know below if you tried it!!:)

Happy Cake Making!

Thursday, July 6, 2017

Rubik Cube Pac Man Cake!

If you were born in the late 70s / early 80s you likely have a special affinity with Rubik cubes or Pac Man.  Ok so yeah, I LOVE the Rubik cube but left the Pac Man to my brothers lol!!

With 40-something birthdays this is such a fun look.  Check out how we made this cake below!  And if you already noticed the typo on the cake the fix is super easy with our approach;-).

Cake ingredients
10" x 10" Square cake pans
Cake boards (10" x 10" and 4" x 4")
Pixel Font template This is the exact sizing I used, some modification required
Sugar glue (made from 1 tsp of tylose, 1 tsp of sugar, and about 2-4 tbsp of super hot or boiling water-mix all and set aside for 15 minutes)
Fondant in white, red, blue, green, orange, and yellow
Black air brush color (or black fondant, although I find it easier to work with air brush)
Fondant rolling pin
Pasta roller mixer adapter
4"W x 4"L x 4"H Styrofoam block (see Styrofoam Note below)

Styrofoam Note
To make this block I used an 8" round cake foam (4" tall) and cut it down to 4"W x 4"L (x 4"H).  I used a foam wire cutter that my husband built using a hand built frame, guitar string, and a voltage regulator.  However, the homemade version can be a little unstable so I do recommend buying a foam cutter online (google hot wire foam cutter).  You can of course just make this cube out of cake, however, you might consider a ganache rather than buttercream layer under the fondant to achieve the crisp square look.

And we begin!

Step 1.  Bake  Square Cakes
Bake two 10"x 10" cake layers (2" tall) per your designated formula.  Remove from pans and let cool completely atop their cake board and cooling racks.  Cut each layer in half.  Wrap your cake in plastic wrap and foil and store in your freezer.  If you have a designated cake freezer you should be good with no wrapping:).

Step 2.  Topper Time

Use the Pixel Font template to create your number topper.  You can use gumpaste, however, I personally prefer to use marshmallow fondant with gum tragacanth mixed in (although you can also use tylose powder).  I like to make toppers like these at least two days in advance to allow enough time to harden.  Typically overnight is good although it will depend on how much gum you mix in.

Step 3.  Buttercream and Cover with Fondant

Bring your cake out of the freezer and let thaw slightly so that you can split the cake layers apart.  Fill your cake accordingly and crumb coat with buttercream.  NOTE:  SQUARE CAKE TIP--->  Trim the corners from the inner layers to allow easier 'squaring' for both buttercream and fondant.  Roll out your fondant to cover your square cake.

ALSO cover your Styrofoam square with buttercream and cover with fondant.  NOTE: STYROFOAM TIP---> Place Styrofoam on cake board prior to buttercream (you can also use shortening or water).

Once tiers are covered in fondant let set to firm for about 1-3 hours in a cool dry area.

Step 4.  Black it out!

Take the firmed tiers and prepare your designated area for the black airbrushing.  You could always opt to cover the cake directly with black fondant rather than perform airbrushing but in all honesty I am NOT a fan of rolling out heavily colored marshmallow fondant lol.  Satin Ice fondant might be a good option here, however, beware of elephant skin and cracks (eek!).

Airbrush both the 10" x 10" and the 4" x 4".  

Step 5.  Fondant Details
Roll out your colors using the pasta roller attachment with the number 2 setting.  Let them firm for about half hour or longer.  This will allow for easier cutting, work-ability, and cleaner finish.

While these colors are drying out make your fondant pieces for the Pac Man detail.  NOTE:  FONDANT WORK-ABILITY TIP--->  Use shortening to 'stick' pieces on so you can easily make adjustments and 'fixes'.  This was how we fixed the text super easily, just quickly relocate ;-).

When the colors are nice and firm start your cutting using the same technique for the side blocks of the Lego Cake.  I used graph paper and drew out lines about 1.25" x 1.25" or whatever sizing works best for your cube.  Again use shortening to allow for quick and easy changes:).

Step 6.  Finishing
Cut out fondant rounds to secure skewers to the back of your number topper with sugar glue.  Insert number toppers into Styrofoam.  Also, insert a skewer under the cube to insert into the cake.  All skewers should be adjust for height accordingly.  And that is it!

Happy cake making!

Thursday, April 20, 2017

Perfect Little Teddy Bear Topper

Hello Cake Couture fans!  This is a quick tutorial on how to make a cute little teddy bear cake topper.  The biggest trick here is getting the measurements right and that is exactly what I have for you today! Let us begin:).

What you will need:

Fondant in desired color
Powdered sugar and shortening (prefer crisco) for work-ability)
Gum Tragacanth OR Tylose Powder (I prefer the gum but I think most people prefer Tylose)
Black Sugar Pearls aka dragees which are available at Michaels or your local cake supply shop
Stitch rotary tool available from your local sewing shop
Scale to weigh fondant
Sugar glue (Use a fork to mix 1 tsp Tylose and 1 tsp sugar with 2 tbsp super hot/boiling water and let set)
optional items: Bow mold available at Michaels in the wax molding area (I think) and contrasting fondant color


Step 1. Mix some gum or tylose with your teddy bear fondant to initiate firmness.  If you wait about 10 minutes or so this will help with modeling firmness.

Step 2.  Make a pear shape body with 3 ounces of fondant.

Step 3. Make the head ball out of 1.7 ounces of fondant

Step 4.  After head and body have dried a little, make two long tear drop shapes with 0.2 ounces of fondant for the arms

Step 5. Make 2 more similar tear drop shapes, but shorter squishing the bottom flat for the legs.

Step 6. With head and body a bit firmer/drier connect the head to the body with sugar glue and with the help of a toothpick if needed.  Assemble the legs and arms using sugar glue soon after you shape them to incorporate a soft look.

Step 7.  Cut a flat round piece out for the mouth area (you can secure this with shortening to avoid fondant mistake issues).  With mouth area piece in, mark eyes and nose spots and apply carefully.  Also add a tail if you like!  Make little ears by rolling a small ball and using a round tool or dowel for the hole.  Affix with sugar glue.

Step 8.  After teddy bear is more or less dry, very carefully run the rotary tool in desired areas to get a nice stitched look.  Also add the bow in contrasting color if desired.  

And that's it for Teddy Bear making!!

Happy Caking!

Friday, January 20, 2017

The Pokemon Pikachu Cake!

Hello Cake Couture fans!!  Here is a SUPER fun cake that I had never posted about!!  I made this cake back in 2015, but WOW it has had about 8,000 pins on Pintrest!

Thank you for loving this cake!<3 And btw when you see the pin now that I added the link to this post it reset the counter to 0 haha!

This post is a descriptive summary of the decor that went into this cake.

Below we will talk about the special font, the lightning, the ball, and modeling!

DISCLOSURE: I am sooo sorry for not having more working pic.  Sometimes I get so consumed in cake making that I forget to take pic!:-/

The Font

There are awesome font generators online for unique fonts. 

For this Pokemon font I went to:  http://fontmeme.com/pokemon-font/

Scroll toward the bottom and type in the text you want to generate.  When you generate this unique font save/copy it and transfer this to a word doc where you can further manipulate it to get it into the size that you want.    

Then cut each letter so you will have a paper template of how the letters will come together.  With these templates cut out your text backing and text letter fondant pieces!

Here is a PDF showing you the text in the sizing I used and images I used to reference for modeling:  Pokemon PDF

The Lightning

For the lighting I cut out from what I have in the PDF, HOWEVER, I realized that it was just much too thick to fit at the shoulder of the base case tier so I trimmed them down thinner.  

You can see that I kept some that were thicker on the cake itself.

For the lighting on the cake, roll out fondant and use a thick shortening (I liked using high-ratio shortening and NOT Crisco) to make the cake items (including the font) stick to itself.  I am not a fan of using water since that makes it impossible to fix a problem without compromising the clean look of the cake.  

For the 3D lightning pieces I mixed in a good amount of Gum Tragacanth (or you can also use Tylose Powder or other gum hardening agent) into the fondant.  Roll thin, cut out, and let dry at least overnight if not two nights.
Next using a skewer and small fondant pieces with a tad of water, affix skewer to the lightning piece and insert into the cake

The Ball

This ball is made from a 3" styrofoam ball.

First, position the styro ball using a skewer or toothpick into another styrofoam surface for support.

Then coat the entire ball with high-ratio shortening (remember, this sticks much better than Crisco!).

Next cut out a circular white piece approximately 5" in diameter.  Although that is technically close to the real measurement I think I actually guesstimated through trial and error lol.

Repeat these steps for the red piece on the opposite side of the sphere.  Make sure to do the red side last so no skewer holes show!  And prior to laying on the red piece you can plug the skewer hold on that side with a little bit of fondant

Finally cut out a couple of fitting gray rounds, a black round, along with the black strip.


Modeling is all about reference, reference, and more reference.  I used the exact print outs from the link above to make each piece here.  

My fondant modeling tips:

  • You have to have patience!  It take a long time to get a shape just right so just try it! 
  • Make pieces like the head, arms, or body by kneading in your preferred gum AND letting the piece(s) dry separately overnight.  
  • Put dried and hardened pieces together using toothpicks and sugar glue (about 1/3 cup of super hot water with about 1/2 tsp of TYLOSE powder) 
  • Work from light colors to dark colors during one seating to prevent major hand washing/dry hand issues lol

Monday, January 16, 2017

How to Throw a Cake Decorating Cake Party!

This was the third time that I hosted a cake decorating party.  The first two times they were run as fundraisers for our preschool and they were fun and successful!  Fyi I charged $15 per cake decorator but $20 is probably a better rate:).

The last time I hosted this party it was for my daughters birthday.  And boy was it SUPER fun!!!  We had about 30 children coming so I knew it was going to be a little bit of a challenge.  But hey I'm always up for a challenge lol.  All the kids had SOOO much fun and myself as well watching and helping them:)!

So here is my quick tutorial on how to host a cake decorating party!
BTW I don't have a huge house so we had to be create on how we cleared out the entire living room,
dining room, and kitchen to make everything work!

Step 1. Prep

Buy all of your ingredients one or two weeks prior to the party.  I used Betty Crocker cake mixes in Chocolate.  My formula is for every 2 cake mix boxes use one LARGE Jello instant pudding mix and one EXTRA egg (and follow the recipe accordingly).  I also made my buttercream, however, despite my homemade intentions I bought fondant at Michael's.

Step 2.  Bake

Bake all of your cakes about 3 or 4 days prior to the party.  I used six 6" pans at a time filling them
just over 1/2 full and baking them for about 40 minutes at 345F (the lower degrees allows for slightly more even rising).  When the cakes are done I pull them out and place a cutting board on top of the cake dome poking out of the cake pan to 'squish' it down.  This avoids the need to cut it out avoiding a mess and any wasted cake.  After about 30 seconds remove the board on top and now you have even baked cakes!:)

Once slightly cooled invert the baked cakes onto a cake board or plate.  This will be what the child will use to decorate the cake on.  I have used cardboard cake boards or the foil coated boards as shown above.  To source these look for a Cash and Carry, try to buy some supplies from a local cake maker or cake decorating shop, or craft shop (Michael's or Hobby Lobby).  However you can always use disposable plates!:)

Once all your cakes are cooled FREEZE them.  This might depend on your freezer...I have a dedicated freezer where I can freeze the cakes unwrapped for best results.  However, my regular freezer can cause freezer burn so in that case I would put it in a tupper but not plastic wrap (the plastic wrap can cause softening which makes it more difficult for kids to decorate).

Step 3. Icing

Buy or make your icing about 2 or 3 days prior to the party.  I use the following buttercream recipe:  http://everybakingmoment.com/recipes/janis-buttercream and make about 1.5 batches per 15 cakes (roughly).  Storing at room temperature is just fine for this.  If you do store it in the fridge make sure to bring it to room temperature prior to the guests using it for decorating!

The day of the party fill decorating bags with a few different icing colors.  In my case I used pastel blue, pink, purple, and green.  I also used different style tips for different colors to make it more fun!

Step 4. Set-up

After having done this a number of times I found the most effective and efficient way to set up is to designate specific tables.  Once the child is done at the Frosting Table they can move on to other decorating tables:  

Table 1 - The Frosting Table
On this table set up lazy Suzan's, I used six lazy Susans each with a small square of non-skid material to allow for holding down the cake to the turntable and one small off-set spatula for icing.  Also allow for bowls of icing.  In this case I placed two bowls between each pair of turntables (see pix:)).
Table 2 - The Piping Table
On this table set up your colored icing bags.  This is where the kids move on after frosting and if they want to do some pipe work.

Table 3 - Fondant Table
For this I had taken the fondant that I bought, split the whole batch into three and colored them a matching pastel pink, blue, and green color.  I also set this table up with small fondant rollers.  No need for additional powdered sugar this fondant was very similar to marshmallow fondant and did not stick to the plastic table covering!  I also placed on the table fondant molds and cookie cutters for the kids creation:).

Table 4 - Decor & Sprinkle Table
On this table I placed sprinkles and other decor items.  I used to decorate cakes so I had extra flowers although I did have to limit them per child.  You can also fill the table with candy or sugar decorations from the craft store.  

Step 5.  Cake Boxes

Provide some sort of box for the kids to carry the cake home.  The cake decorating is the party activity AND the party favor!  I used retail cake boxes because I used to sell cakes and had these left over, however, even in bulk these boxes are expensive.  You can also find cake boxes at the craft store or you can try to cut cost if you save and use Costco-style cardboard boxes. 

Some Party Tips:

1. When a child arrives give them their cake straight from the freezer FROZEN

2. Use a sharpie to write the child's name on the cake board or their box

3. We didn't have a cake!  My idea was for kids to cut their cakes and share it with their families but really that was going to get crazy messy and complicated.  Plus the kids get really connected to their cakes so everyone liked the idea of saving it for later.  My girls definitely enjoyed us eating their cakes for the next few days;).

That sums it up!!  It is a lot of work but SOOO much fun!  
Have a great party!

Tuesday, January 10, 2017

Quick and Easy Cake Pops

So I have realized there are several cake-decorating topics that I have not covered...and cake pops is one of them!!!

Although my work has been mostly in cakes there were occasions I was asked to make cake pops.  I will most definitely not claim to be a cake pop expert.  This is a basic and quick tutorial for the pop making lover who just wants to make a better cake pop than their first:).


Your Cake
Chocolate Melts
Cake Pop sticks

NOTE on melts: I have had good luck with Wilton white or Hobby Lobby colored melts.  I have not had much luck AT ALL with colored Wilton or other brand colored chocolate.  I know pro's use other brands with some special consistency additives, however, this again is the quick and easy version:)

Disclosure: Despite scouring my cake pictures for some behind the scenes images I unfortunately don't have any...just finished cake pop pic:).

Step 1.

Make your cake about 3 to 4 days in advance.  After your cake has cooled, wrap it in plastic wrap or in a Tupperware and freeze.  I recommend not breaking up the cake at all at this point but if must that is not a big deal.

Step 2.

Bring out your cake from the freezer.  While it is still cold cut the edges and the top.  These rough sides will interfere with a nice workable consistency.  Cover and set the cake aside and let it come to room temperature.  I repeat...cover the bowl!  As the cake is coming to room temperature, condensation will set in due to the thawing process, if left uncovered the cake would dry out.  If I remember correctly bringing the cake to room temperature (or at least somewhere near that to make it workable) takes about 2-3 hours...or maybe less?  Let me know if you try it I can't remember I'm sorry!

Step 3.

Once the cake has reached room temperature add a small amount of icing...maybe one tablespoon at a time.  Since the cake has extra moisture due to thawing you don't need as much icing as you might otherwise have used (e.g. if you didn't freeze the cake).  Mash everything together with your hands and get it to the consistency you like. 

Step 4.

Roll one-ounce balls of cake in your hands to create cake balls and place on a tray.  I did start using a scale for this because if you go too big it gets too heavy.  The Teddy Bear cake pops here were actually about 2 ounces and they were SO heavy that I lost A LOT of them to weight as I was making them.  These are the ones that survived:).

Step 5.

Set your tray in the fridge for about 10-30 minutes.  No need to cover.  Be careful not to make it too cold because if the cake is too cold and your chocolate too warm, you will get cracking in the chocolate.  

Step 6.

While the cake balls are in the fridge melt your chocolates in an wide-ish 8 ounce glass cup.  Don't use one that is super tall and don't use a bowl, these are more difficult to work with.  The best fit are short-ish 8 ounce glass cups.  Fill the cup to the top with chocolate and microwave as such: 1 min, stir, 1 min, stir, 30 sec, stir, 30 sec, stir, 20 sec, stir, etc.  You might have to alter your routine to your microwave, weather, and chocolate response.  Just make sure to heat slowly and stir to keep the heat distributed well.  This chocolate can be delicate and can easily hit an unworkable state.  I believe there is a chocolate melter that makes this easier at Michaels or on Amazon I'm sure.  I've never used it but I have heard it works great!:)

Step 7.

Bring out your cake balls and using a stick poke all of them at the top.  Then take a stick, dip it in the chocolate and position it in a cake ball.  Repeat for all cake balls.

Step 8.

By the time you finish putting sticks into all of the cake balls you can try dipping them. HOWEVER, if they are too soft this would compromise their strength when dipping, so pop them back in the fridge for about 10 minutes or so if you must.  Don't go too long in the fridge or your pop will get cold enough to cause cracking.  You might have to experiment to find the sweet spot of coldness here:).

Step 9.

To Dip:

When dipping hold the pop completely vertical and put the entire pop directly in the cup.  Once inside the chocolate, rotate the pop and/or the cup around to get full coverage.  Make sure to get the chocolate to cover the seam where the stick inserts.  

Pull the pop out and hold up letting the chocolate settle.  If you want your cake balls to sit on a plate make sure to place them on a wax paper-covered tray to set.  Otherwise place them in a cake pop holder or styrofoam for standing pops.

To add sprinkles or anything you want to stick to the chocolate make sure to add that while the chocolate is still wet.

Step 10.
Decorate.  I liked adding fondant accents to pops and you can also decorate with cute wrappers and/or ribbon.  The A's pops above used royal icing and those sure were tricky!

That's it, 10 steps!!
Good luck!!!